PADE MODEL T 45 ROUND END TENONERS
Price, Ex Works Smyrna,
GA:
$11,357.00
Technical Data
Tenon length, maximum: 100
mm (4h) + thickness
Tenon depth, maximum: 50
mm (2h)
Tenon thickness, maximum: 30
mm (1-3/16h)
Cutter head motor: 3
HP (2.2 kW)
Positioning motor: 1
HP (0.75 kW)
Net weight, approximate: 2,110
lbs. (960 kg)
Dimensions, approximate: 52h
x 44h x 49h
Worktable adjustment | vertical: 100mm
Worktable adjustment | transversal: 50mm
Worktable adjustment | front tilting: 0
to 20
Worktable adjustment | front radial inclination: -30
to +30
Work piece fence rotation: 0
to 45
Cutter head path rotation: 0
(horizontal) to 90 (vertical)
Machine
base and tables
Solid structure in electro welded steel.
Worktables in cast iron, sliding on two large-diameter
round bars and guided by special antifriction self-lubricating
guides. Independent adjustment of the two worktables.
Working cycle
Single end, manual feed, and automatic cycle. An electronic
card (PLC) controls the working cycle, performing auto-
diagnostics on all electric components to immediately locate
any possible faulty item.
The
machine is equipped with two tables which automatically move
in gpendulumh manner into the machining area, remaining locked
in position during machining, and then moving out of the machining
area as the other table moves in.
Workpieces are machined on the two tables in alternate cycles
to allow the operator to load and unload parts on one working
table while the part on the other table is being machined. This
allows for the production of up to 10-15 tenons per minute, depending
on the ability of the operator and the characteristics of the
tenons.
The tenon execution cycle is fully mechanical. The head always
travels in a one simple round or oval circuit, assuring reliability
and minimal wear of the moving parts over time. The Pade T45
has the ability to execute the tenon in anti-splintering cycle
mode to minimize tear out even when machining difficult wood
species.
Operating adjustments
The two tables are independently adjustable in height and can
be tilted from 0 to 20. Each table has a miter fence with 0
(square end) to 45 (mitred end) swivel settings.
Length and thickness adjustments are made by means of mechanical
digital readouts.
Cycle
execution speed is infinitely adjustable by the operator, so
that he can always choose the most suitable working speed
according to piece and tenon dimensions and type of wood.
Easy and fast adjustment of tenon width and thickness thanks
to
mechanical digital readouts (SIKO), allowing an immediate and
precise control of tenon dimensions.
A single wrench is used for all adjustments.
Details for shipment:
Net weight 960 kg
(2,110 lbs)
Dimensions 1320mm ~ 1120mm ~ 1250mm
(52h
~ 44h ~ 49h)
Machine is equipped with safety devices in accordance with CE norms
