top of page


lumber stacker

Paul Auto Stacker for Single Workpieces

We develop stackers for the automated stacking of workpieces and use on the outfeed side of cross-cut systems. They can be employed for order picking, temporary storage or preparation of the cut pieces for transport. The cut pieces are pushed from the sorting belt onto the stacker, arranged in layers and deposited on pallets or alike. An optional stick magazine places stabilization sticks after every preset number of layers.

lumber stacker for long lengths

Paul ZSA Automatic Stacker for Boards

The ZSA automatic stacker is suitable for stacking boards of different lengths in layers. With the stick magazine, which is available as an option, stabilizing sticks are inserted according to the programmable number of layers. The mechanism automatically adjusts to the board length to be stacked. The desired stacking height can also be preset. In addition, workpieces of different widths can be stacked in one layer. The system can also be retrofitted into existing lines. Due to the particularly economical design, the payback period of these automation components is especially short

robotic vacuum stacking system

Robot System

The most flexible type of workpiece handling is the use of articulated robots. Whether equipped with vacuum heads or gripper system, PAUL offers an optimally suited solution for almost every requirement. There are almost no limits to imagination.

lumber vacuum destacker

Vacuum Stacking/Destacking System

Vacuum gantry systems are ideally suited for the automation of the destacking/stacking operation upstream and downstream of the circular sawing machine. They work fully automatically, require very little maintenance, can be used flexibly and are capable of handling heavy loads. Even workpieces with sensitive surfaces can be processed with ease. Sticks contained in the stack can be automatically removed and bundled, if required. We configure the appropriate vacuum gantry to individual customer requirements, whether for solid wood or panel applications.

bottom of page